NVIDIA/Mellanox Compatible 400G 2xSR4 OSFP IHS/Finned Top 8x50G PAM4 850nm 50m MMF DOM Dual MPO-12/APC InfiniBand HDR Optical Transceiver Module

$639.00

SKU: 53EB3C489FC8

Product Highlights

HTML

  • Tested for compatibility with NVIDIA/Mellanox QM9700 and QM9790 InfiniBand switches, subject to supported hardware and firmware configurations.
  • Verified across multiple firmware versions and tested against applicable InfiniBand HDR performance and BER requirements.
  • Compliant with OSFP MSA and CMIS 4.0 specifications, as well as RoHS environmental requirements.
  • 30-Day Free Return, 1-Year Free Replacement, 3-Year Warranty, and Lifetime After-Sales Technical Support.

NVIDIA/Mellanox Compatible 400G 2xSR4 OSFP IHS Finned Top 8x50G PAM4 850nm 50m MMF DOM Dual MPO-12/APC InfiniBand HDR Optical Transceiver Module

The SFPPlaza NVIDIA/Mellanox Compatible 400G 2xSR4 OSFP Optical Transceiver Module is designed for high-performance InfiniBand HDR and 400Gb/s data center interconnect applications. Operating at an 850nm wavelength, this module integrates eight 50G PAM4 optical lanes to deliver an aggregate data rate of 400Gb/s through two independent 200G SR4 optical interfaces.

Featuring an OSFP IHS/Finned Top form factor, the module is designed primarily for switch-side applications in compatible NVIDIA Quantum-2 InfiniBand platforms, including QM9700 and QM9790 switches. Its integrated finned-top housing supports the thermal requirements of high-density, high-speed switching environments.

The dual-port 2xSR4 architecture provides two separate MPO-12/APC optical interfaces. Each interface carries four 50G PAM4 lanes and supports up to 200Gb/s transmission. The module supports optical links of up to 50 meters over OM4 multimode fiber, making it suitable for short-reach connections within data centers, AI clusters, and high-performance computing environments.

For network deployment, the OSFP-400G-2xSR4 module can connect a compatible NVIDIA InfiniBand switch to two 200G QSFP56 HDR network adapters through two independent MPO-12/APC multimode fiber links. This architecture enables efficient 400G aggregate connectivity while maintaining two separate 200G optical channels. Correct fiber polarity, lane mapping, and switch port configuration are essential for successful link establishment.

Unlike conventional single-port 400G SR4 transceivers, which use four 100G PAM4 lanes through one MPO optical interface, the 400G 2xSR4 architecture uses eight 50G PAM4 lanes distributed across two independent MPO-12/APC interfaces. These different lane rates and optical architectures mean that standard 400G SR4 modules cannot directly interoperate with 400G 2xSR4 modules.

With Digital Monitoring (DOM) support and compliance with applicable OSFP MSA and CMIS specifications, this transceiver helps network operators monitor module operating conditions and maintain reliable optical connectivity. It is a practical solution for NVIDIA InfiniBand HDR switching environments, AI infrastructure, HPC clusters, and high-bandwidth data center networks.

Specifications

Part Number OSFP-400G-2xSR4-IB Vendor Name SFPPlaza
Form Factor OSFP Max. Data Rate 400Gbps
Wavelength 850nm Max. Cable Distance 30m (OM3) /50m (OM4)
Connector Dual MTP/MPO-12 APC Media MMF
Transmitter Type VCSEL Receiver Type PIN
Max. Power Consumption ≤14W Protocols IB HDR ,400G Ethernet Compliant
DDM/DOM Supported Commercial Temperature Range 0~70°C(32 to 158°F)
Modulation (Electrical) 8x50Gb/s PAM4 Modulation (Optical) 8x50Gb/s PAM4

Highlights

NVIDIA Mellanox InfiniBand Compatibility

SFPPlaza InfiniBand transceivers are designed for compatibility with supported NVIDIA Mellanox InfiniBand networking equipment, providing high-speed connectivity for HPC clusters, AI computing infrastructure, and data center networks. They are suitable for deployment in compatible InfiniBand switches, host channel adapters (HCAs), and other network devices that support the InfiniBand interface. With low-latency performance and reliable high-bandwidth data transmission, these transceivers help support demanding workloads such as distributed AI training, deep learning, and scientific computing. Compatibility depends on the specific device model, port specifications, and transceiver requirements. Please verify equipment compatibility before deployment.

What Is InfiniBand?

InfiniBand is a high-performance, switched-fabric interconnect technology widely used in high-performance computing, AI clusters, and enterprise data centers. It enables high-bandwidth, low-latency communication between servers, storage systems, and other network-connected devices. With its efficient data transfer capabilities and scalable architecture, InfiniBand is particularly well suited for workloads that require rapid communication between compute nodes, including scientific simulations, deep learning, and distributed AI training.

Questions & Answers

HTML

OSFP-400G-2xSR4-IB: Frequently Asked Questions

Q: What are the main applications of the OSFP-400G-2xSR4-IB module?

A: The OSFP-400G-2xSR4-IB is designed for switch-side applications in NVIDIA Quantum-2 InfiniBand networks, including QM9700 and QM9790 switches. It provides two independent 200G SR4 optical links through dual MPO-12/APC connectors. Each link can connect to a compatible 200G QSFP56 HDR adapter using the appropriate multimode fiber cable, enabling 400G aggregate connectivity between the switch and two HDR network interfaces. Host port configuration and fiber polarity must match the intended link architecture.

Q: Can this 400G 2xSR4-IB module be used with a ConnectX-7 OSFP 400G NIC?

A: This module features an OSFP IHS/Finned Top housing designed primarily for switch-side installations, such as supported QM9700 and QM9790 switch ports. It is not the recommended choice for NIC-side applications. For compatible NICs, select a transceiver with the appropriate OSFP housing and host-side configuration, such as a supported flat-top OSFP module. Always verify the NIC cage, thermal design, and module compatibility before deployment.

Q: Can this 400G 2xSR4-IB module interconnect directly with a standard 400G SR4 transceiver?

A: No, not as a direct optical link. The 400G 2xSR4-IB uses two independent 200G optical interfaces, each with 4x50G PAM4 lanes, for a total of 8x50G PAM4 lanes across two MPO-12/APC connectors. A conventional 400G SR4 module uses one optical interface with 4x100G PAM4 lanes and a single MPO connector. Their lane rates, optical interfaces, and link architectures differ, so they are not directly interoperable. Use matching 2xSR4 equipment or a specifically supported breakout solution.

Q: What fiber cable is required for the OSFP-400G-2xSR4-IB module?

A: This module uses two MPO-12/APC optical connectors and operates over multimode fiber (MMF) at 850nm. Use two compatible MPO-12/APC multimode fiber links, with OM4 supporting distances of up to 50 meters according to the specified module reach. Ensure that the fiber type, connector polish, polarity, and lane mapping are suitable for both ends of the connection.

Q: Can each 200G optical interface operate independently?

A: The module contains two independent 200G SR4 optical interfaces, each carrying four 50G PAM4 lanes through its own MPO-12/APC connector. Whether each interface can be configured and operated independently depends on the switch platform, firmware, and port breakout capabilities. Confirm the supported port configuration on the QM9700 or QM9790 before deployment.
x