NVIDIA/Mellanox MMS4X00-NS-T (980-9I30H-F4NM00) Compatible 800GBASE-2xDR4 OSFP IHS/Closed Finned Top 8x100G PAM4 1310nm 100m SMF DOM Dual MPO-12/APC Optical Transceiver Module for SN5610 Series Switch

$659.00

SKU: 1BAC69624EB2

Product Highlights

  • Maximum Power Consumption: ≤16W.
  • Professional Compatibility Verification and Optical/Electrical Parameter Test Reports Available.
  • Compliant with the Hot-Pluggable OSFP MSA and applicable IEEE 802.3 electrical interface specifications.
  • Designed to meet Class 1 laser safety requirements (subject to applicable product certification); RoHS compliant and lead-free.
  • DDM (Digital Diagnostic Monitoring) Supported.
  • Designed for NVIDIA Spectrum-4 SN5610 Series Switches and compatible 800G Ethernet platforms.
  • 30-Day Free Return, 1-Year Free Replacement, 3-Year Warranty, and Lifetime After-Sales Technical Support.

NVIDIA/Mellanox MMS4X00-NS-T (980-9I30H-F4NM00) Compatible 800GBASE-2xDR4 OSFP IHS/Closed Finned Top 8x100G PAM4 1310nm 100m SMF DOM Dual MPO-12/APC Optical Transceiver Module for SN5610 Series Switch

The NVIDIA/Mellanox MMS4X00-NS-T (980-9I30H-F4NM00) Compatible OSFP-800G-2xDR4S optical transceiver is designed for high-density 800G Ethernet connectivity in data center and cloud networking environments. Intended for compatible NVIDIA Spectrum-4 SN5610 Series Switches, this twin-port OSFP module delivers an aggregate data rate of 800Gbps through two independent 400G DR4 optical channels.

Operating at a nominal wavelength of 1310nm, the module uses eight 100G PAM4 optical lanes distributed across two MPO-12/APC interfaces. Each interface carries a separate four-lane 400G DR4 optical link, providing flexible connectivity for 800G switch interconnections and 2x400G Ethernet applications. It supports up to 100m single-mode fiber connectivity under the specified link configuration.

The dual-channel architecture enables flexible port utilization in high-capacity switching environments. Each optical interface can connect to a compatible 400G DR4 port using a dedicated single-mode MPO-12/APC fiber cable. Supported breakout configurations depend on the host platform, optical lane mapping, and cable assembly.

Featuring an OSFP IHS/Closed Finned Top housing, this transceiver is designed for compatible air-cooled OSFP switching platforms requiring additional module-level heat dissipation. The finned housing provides increased surface area for thermal management and should be selected according to the host cage, airflow direction, and cooling specifications.

DDM functionality enables monitoring of supported optical and operating parameters, helping network operators assess link conditions and simplify troubleshooting. With a maximum power consumption of ≤16W, this module provides a high-density optical connectivity option for Spectrum-4 switching environments, data center fabrics, and cloud networking infrastructure.

Specifications

Part Number OSFP-800G-2xDR4S Vendor Name SFPPlaza
Form Factor Twin-port OSFP Max. Data Rate 800Gbps
Wavelength 1310nm Max. Cable Distance 100m
Connector Dual MTP/MPO-12 APC Media SMF
Transmitter Type EML Receiver Type PIN
Max. Power Consumption ≤16W Protocols 800G Ethernet Compliant
DDM/DOM Supported Commercial Temperature Range 0 to 70°C (32 to 158°F)
Modulation (Electrical) 8×106.25Gb/s PAM4 Modulation (Optical) Two ports 4×106.25Gb/s PAM4

Highlights

Designed for NVIDIA Spectrum-4 SN5610 Switching Platforms

The MMS4X00-NS-T compatible transceiver is designed for high-bandwidth optical interconnections in NVIDIA Spectrum-4 SN5610 Series Switch deployments. It is suitable for network architectures that require high-density 800G connectivity and flexible 400G link allocation. Typical applications include:
  • SN5610 switch-to-switch optical interconnections.
  • 800G Ethernet leaf-spine network architectures.
  • Data center aggregation and high-capacity uplinks.
  • Cloud infrastructure and hyperscale Ethernet networks.
  • RoCE-based AI and high-performance computing network fabrics.

Dual 400G Optical Links for Flexible Port Utilization

The twin-port architecture provides two separate 400G optical connections within one OSFP module. This arrangement supports flexible network design, allowing two optical channels to connect to compatible ports on the same switch or across separate network devices, subject to host configuration and supported operating modes.

Finned-Top Thermal Design for Air-Cooled Switches

The closed finned-top housing is designed for compatible OSFP cages that require additional module-level cooling. Its thermal integration is particularly relevant to high-density switch environments where airflow and module heat dissipation must be carefully managed. Confirm the required housing type and airflow direction for the target SN5610 configuration.

Flexible 800G and 2x400G Network Architecture

The dual MPO-12/APC interfaces allow the module to participate in 800G links or two separate 400G DR4 optical connections. This provides network operators with additional flexibility when planning switch interconnections, downstream links, and network capacity expansion.

Optical Monitoring and Deployment Assistance

DDM diagnostic information helps administrators monitor supported optical operating parameters and identify potential link issues. Professional compatibility verification and parameter test reports are available to assist with system integration, deployment validation, and troubleshooting.

100% Compatibility Validated for Arista, NVIDIA, Cisco & Broadcom RoCE Networks

SFPPlaza optical transceivers, AOCs, and DACs undergo rigorous compatibility and interoperability testing with leading RoCE networking platforms, including Arista 7060XE7 and 7060X6 Series data center switches, NVIDIA Spectrum-4 SN5000 Series switches, Cisco N9100 and Nexus 9364E-SG2 Series switches, and Broadcom BCM57708 and BCM957608 NICs. Designed for high-performance RoCE and AI data center networks, our connectivity solutions deliver reliable high-speed data transmission, stable link performance, and seamless integration across demanding network environments.

NVIDIA/Mellanox (Ethernet) 920-9N42F-00RI-3C1, MSN4700-WS2FC, 900-9X81E-00EX-ST0, MCX75310AAS-NEAT, B3240, MCX623105AC-VDAT
Arista 7060XE7-128PE, 7060X6-64PE, 720R4-128PE, 7060DX5-32, 7050DX4-32S, 7280DR3A-54
Juniper QFX5240-64QD, QFX5700, QFX5220-32CD, QFX5120-48T, QFX5110-32Q
Cisco N9164E-NS4-O, N9364E-SG2-Q, Nexus 9364D-GX2A, Nexus 9504, 8501-SYS-MT, Nexus 3432D-S, N9K-X9400-16W(200G)
Broadcom P1800GO, BCM957608-P1400GDF00, BCM957508-N1200G
HUAWEI CE9875-64EO, CloudEngine 16804, CloudEngine 9865-4C, CloudEngine S6780-H4Z, CloudEngine 6885-48YS8CQ-T
H3C S9827-64EP, S9857-24DH8EP, S9855-32D, S9820-8C
Nokia 7220 IXR-H5-32D, 7220 IXR-H2

Questions & Answers

OSFP-800G-2xDR4S: Frequently Asked Questions

Q: Can optical modules with different form factors, such as OSFP and QSFP-DD, be interconnected?

A: Yes. Different physical form factors do not necessarily prevent optical interconnection. An OSFP optical channel can connect to a compatible QSFP-DD optical module when both modules support the same optical standard, wavelength, lane mapping, connector type, fiber polarity, and link budget. For example, a 400G DR4 channel can interconnect with a compatible 400G QSFP-DD DR4 module through a suitable MPO-12/APC single-mode fiber cable. However, each module must be installed in its corresponding host port.

Q: Can an 800G OSFP optical module be directly installed in a 400G QSFP-DD port?

A: No. OSFP and QSFP-DD have different physical dimensions and cage designs. An 800G OSFP module cannot be directly inserted into a QSFP-DD port. However, compatible optical channels can still be interconnected through fiber when the optical specifications and link configuration match.

Q: Can this 800G 2xDR4 module connect to two separate 400G DR4 optical modules?

A: Yes. This twin-port OSFP module provides two independent 400G DR4 optical channels through two MPO-12/APC interfaces. Each channel can connect to a compatible 400G DR4 optical module using a dedicated single-mode MPO-12/APC fiber cable. Verify the connector polarity, lane mapping, optical specifications, and link budget before deployment.

Q: Can the two DR4 optical channels be configured and operated independently?

A: The module contains two independent 400G optical channels, each with its own MPO-12/APC interface. They are designed to support separate optical links and can connect to two compatible ports on the same switch or to ports on different devices. Actual independent link configuration, rate selection, and diagnostic monitoring depend on the module implementation and host platform support.

Q: Is this module compatible with NVIDIA Spectrum-4 SN5610 Series Switches?

A: Yes. The MMS4X00-NS-T (980-9I30H-F4NM00) is an NVIDIA twin-port 800G OSFP 2xDR4 transceiver specified for 2x400GbE connectivity, dual MPO-12/APC interfaces, and 1310nm single-mode fiber. It is intended for compatible Spectrum-4 switching platforms, including SN5610 deployments. Confirm the exact switch configuration, OSFP cage and cooling requirements, and firmware support before installation.
x